What kind of properties does stainless steel plate have?

Author：

Stainless steel plate has some properties such as corrosion resistance, high temperature oxidation resistance and physical properties. The following will introduce the performance of stainless steel plate from these three aspects to increase your understanding of it: Nichrome

Stainless steel plate has some properties such as corrosion resistance, high temperature oxidation resistance, physical properties, etc. The following will introduce the properties of stainless steel plate from these three aspects to increase your understanding of it:

Corrosion resistance:

Stainless steel has a similar ability to resist general corrosion as the unstable nickel-chromium alloy 304. Prolonged heating in the temperature range of chromium carbide degrees may affect Alloys 321 and 347 in harsh corrosive media. Mainly used in high temperature applications, which require strong resistance to sensitization of the material to prevent intergranular corrosion at lower temperatures.

High temperature oxidation resistance:

Stainless steel has high temperature oxidation resistance, but the oxidation rate will be affected by inherent factors such as exposure environment and product form.

Physical properties:

The total heat transfer coefficient of a metal depends on other factors besides the thermal conductivity of the metal. In most cases, the heat dissipation coefficient of the film, the scale and the surface condition of the metal. Stainless steel keeps the surface clean, so it conducts heat better than other metals with higher thermal conductivity. Liaocheng Suntory Stainless provides 8. Technical standards for stainless steel plates High-strength stainless steel plates with excellent corrosion resistance, bending workability, toughness of welded parts, and stamping workability of welded parts and their manufacturing methods. Specifically, it contains C: 0.02% or less, N: 0.02% or less, Cr: 11% or more but less than 17%, appropriate content of Si, Mn, P, S, Al, Ni, and satisfies 12≤Cr Mo 1.5Si≤ 17. The stainless steel plate with 1≤Ni 30(CN) 0.5(Mn Cu)≤4, Cr 0.5(Ni Cu) 3.3Mo≥16.0, 0.006≤CN≤0.030 is heated to 850～1250℃, and then heated to 1℃/s The above cooling rate cooling heat treatment. In this way, it can become a high-strength stainless steel plate with a structure containing more than 12% martensite by volume, high strength of more than 730MPa, corrosion resistance and bending performance, and excellent toughness of the welding heat affected zone. Reuse of Mo, B, etc., can significantly improve the stamping performance of the welded part.

The flame of oxygen and gas cannot cut stainless steel plate because stainless steel is not easy to be oxidized.